WIRELESS CAMERA KIT 12-24 VOLT WITH ONE CAMERA
Data
net weight1 kg
Description: • 7” monitor - Format: 16:9 and/or 4:3 - Resolution: 1024x600 pxl - Supports up to 2 cameras (1 with…
• 7” monitor
- Format: 16:9 and/or 4:3
- Resolution: 1024x600 pxl
- Supports up to 2 cameras (1 with audio)
- Brightness: 450cd/M2 450:1
- 2.4G Hz digital wireless receiver
- Operating distance: >150m
- Removable sun visor
• Wireless camera
- Sensor: 1/3.7 CMOS
- Definition: 720P
- Resolution: 1280x720
- Camera viewing angle: 120°
- Night vision: up to 10m
- Audio: YES
- Degree of protection: IP69K
- Frequency range: 2400~2483.5MHz
• Power supply: DC 12V-32V
• Remote control
• Operating temperature: -20°C / +70°C
ATTENTION:
- For the assembly diagram, see attached document
- Format: 16:9 and/or 4:3
- Resolution: 1024x600 pxl
- Supports up to 2 cameras (1 with audio)
- Brightness: 450cd/M2 450:1
- 2.4G Hz digital wireless receiver
- Operating distance: >150m
- Removable sun visor
• Wireless camera
- Sensor: 1/3.7 CMOS
- Definition: 720P
- Resolution: 1280x720
- Camera viewing angle: 120°
- Night vision: up to 10m
- Audio: YES
- Degree of protection: IP69K
- Frequency range: 2400~2483.5MHz
• Power supply: DC 12V-32V
• Remote control
• Operating temperature: -20°C / +70°C
ATTENTION:
- For the assembly diagram, see attached document
Characteristics: Installation step: 1) Monitor connect the power cable. 2) The power cable for monitor: The red …
Installation step:
1) Monitor connect the power cable.
2) The power cable for monitor:
The red wire cable connect the positive power DC12-24V;
The black wire cable connect the negative power;
The green wire cable connect the turn right power if the camera install in the right of vehicle;
The white wire cable connect the back off power if the camera install in the back of vehicle;
3) Wireless camera install in the front/right/left/back of vehicle according customer's requirement, and connect the power.
1) Monitor connect the power cable.
2) The power cable for monitor:
The red wire cable connect the positive power DC12-24V;
The black wire cable connect the negative power;
The green wire cable connect the turn right power if the camera install in the right of vehicle;
The white wire cable connect the back off power if the camera install in the back of vehicle;
3) Wireless camera install in the front/right/left/back of vehicle according customer's requirement, and connect the power.
We recommend having the camera kit installed at a fully equipped workshop/electrician.
Accessory
Spare Part | Date | Shop |
---|---|---|
PE037132retrocamera WIRELESS c/antenna | net weight1.5 kg | € 163.76 |